Tuesday, February 28, 2017

PolyBody® Line Bodies, Service and Aerial Bodies by United Plastic Fabricating



The PolyBody® Line Bodies, Service and Aerial Bodies are all made from polypropylene, a tough, durable, impact resistant plastic material. The PolyBody® will not rust or corrode, can resist day-to-day dings and dents and offers lighter weight than conventional steel or fiberglass bodies. The PolyBody® is a true long-life body that is transferable from chassis, with the outstanding appearance that only a hand crafted body can provide.

Find out about poly products at: http://www.unitedplastic.com/product/line-bodiesserviceaerial-bodies/

Saturday, February 25, 2017

Winter Treads



When much of the country is getting pounded by winter storms and deep snow, our thoughts turn to tires. Some pickup truck owners have separate wardrobes for summer and winter. Nome, Alaska, and Miami residents maybe not so much.

Pickup winter wear can include anything from a fresh wax to do-it-yourself undercoating to lighter lubricating fluids to a block heater to winter diesel fuel. But does your truck's cold-weather wardrobe include winter tires?

Winter tires are designed for cold weather and associated precipitation. Tires rated for mud and snow (M+S) may not qualify as winter tires and often don't excel in either mud or snow. A winter tire's specific compound, tread design — and studs if you want them — is far more suitable and safer on cold roads and the various forms of water you might find on them.

In every road-based comparison in which I've participated, dedicated winter tires were more valuable than the number of driven wheels. However, while winter tires can improve performance, they are no substitute for common sense and can be pushed beyond their limits. They also add expense and create the issue of storage logistics.

The U.S., unlike some countries, does not mandate winter tire use, although some states and cities have laws about the use of studded tires or chains. It's worth noting that some insurance companies offer discounts for using winter tires.

Do you think winter tires should be required for new drivers or general safety, and if so, under what parameters? And if you don't believe in running dedicated winter tires, studs or chains, how do you deal with marginal winter traction? Let us know in the comments section below.

Source: http://news.pickuptrucks.com/2017/01/talking-trucks-tuesday-winter-treads.html#more

By G.R. Whale

Cars.com graphic by Paul Dolan; cars.com image by Bruce Smith

Wednesday, February 22, 2017

IMT Dominator® Master Lock System


The master lock is a spring-loaded system with a push-pull operation that ensures a secure lock every time. Users will have peace of mind with the new master lock system

Sunday, February 19, 2017

BrandFX - WHO WE ARE


Started in 1984, BrandFX Body Company has grown to become the world’s largest producer of advanced composite line bodies, service bodies, insert, toppers, and covers. We are fully focused on designing and producing lightweight, durable composite truck bodies that deliver the highest life cycle value in the industry.

Our truck bodies have been proven to deliver more than 20 years of reliable service, while also maintaining their quality finish and appearance. That’s why, for over 30 years, many small-to large-size companies, including five out of the top six U.S. service fleets, have counted on BrandFX. Today, the BrandFX product line is expanding to include specialized bodies for the lawn care and pest control industries.

At BrandFX, we believe in American-made quality, and all of our service bodies are manufactured in the U.S. Our operation includes almost 1 million square feet of manufacturing space in facilities strategically located across the U.S., supporting the efforts of more than 450 employees. To ensure the consistent quality of our truck bodies, we utilize the most advanced manufacturing and quality control processes.

Over the years, our innovations have led to many improvements in service body design and performance. And we continue to innovate. We are committed to working closely with our customers, knowing that the best designs and ideas often result from a partnership effort between our customers and us.

Combining the experience of over three decades of operation with outstanding facilities and a drive to produce innovative, highly durable truck bodies…BrandFX is committed to meeting the market’s need for high life cycle value truck service bodies.

WE’VE EARNED THE TRUST

Thursday, February 16, 2017

Which BEDSLIDE is right for you?


BEDSLIDE now offers 5 models of BED SLIDE Cargo Trays. Which BEDSLIDE is right for you? The BEDSLIDE is the best truck bed accessory to help access tools and equipment.

Monday, February 13, 2017

GET MORE OUT OF YOUR EXISTING FLEET - Switch-N-Go®


ARE YOU LOOKING FOR A WAY TO ARE YOU LOOKING FOR A WAY TO GET MORE OUT OF YOUR EXISTING FLEET? DO YOU HAVE CONCERNS THAT YOU WILL NOT BE ABLE TO COMPLETE ALL OF YOUR WORK WITH LIMITED STAFFING?

Switch-N-Go® can be a solution to these issues no matter what government entity you work for. As a proven transportation solution, Switch-N-Go® can help you accomplish your tasks with fewer trucks and people.

Instead of letting your trucks sit dormant in the off seasons up fit them with Switch-N-Go® systems and use your trucks through out the entire year.

More at: http://www.switchngo.com/? DO YOU HAVE CONCERNS THAT YOU WILL NOT BE ABLE TO COMPLETE ALL OF YOUR WORK WITH LIMITED STAFFING?

Switch-N-Go® can be a solution to these issues no matter what government entity you work for. As a proven transportation solution, Switch-N-Go® can help you accomplish your tasks with fewer trucks and people.
Instead of letting your trucks sit dormant in the off seasons up fit them with Switch-N-Go® systems and use your trucks through out the entire year.

More at: http://www.switchngo.com/

Friday, February 10, 2017

CURT's culture is built on change - CURT Towing Products


"CURT's culture is built on change. Our motto is: the only constant is change. This allows for continuous innovation and continuous improvement in our products and services. That's what makes this company different."

Tuesday, February 7, 2017

BOLT Locks with Jeremy TwitchThis Stenberg


Jeremy "TwitchThis" Stenberg show us the BOLT Locks that he uses on his vehicle!

Saturday, February 4, 2017

Work truck wheels require care for extended life


Aluminum and steel wheels are practically bullet proof and a daily glimpse for cracks and rust is probably sufficient as long as you take the steps necessary to maintain them.

“If you have good maintenance practices the wheel should last the life of the vehicle, if not longer,” says Brandon Uzarek, product design engineer at Accuride.

If you’re running steel or aluminum wheels, Uzarek says it’s critical to be sure all mounts and surfaces are clean and flat.

Dave Walters, Alcoa field service manager, agrees, adding the most important part of wheel maintenance is making sure the studs, drum and mounting faces are all clean before installation ever takes place.

“Sometimes, excess or foreign material can work its way into the joints and you’ll lose clamping force,” Uzarek says.

Uzarek recommends cleaning the studs when the wheels are mounted and on hub pilot wheels, studs need to be oiled while also oiling the gap between the flange.

To account for any shifting that takes places when the truck finally hits the road, Uzarek advises wheels be re-torqued between five and 100 miles after the initial mount and again every 10,000 miles.

“A lot of fleets do not do re-torques because it’s an inconvenience,” he says.

Walters says fleets can mitigate much of that inconvenience and still reap the benefits of proper torque by taking a 5 to 10 mile test drive after the wheel is initially mounted to settle the joint, then checking the torque.

“If you cleaned them and did everything properly, you shouldn’t have to re-torque them again unless the wheel is removed,” he says, adding this method was included in the Technology Maintenance Council (TMC) Recommended Practice (RP) 237.

Re-torquing practices can vary and Chris Putz, Maxion Wheels principal engineer for commercial vehicle wheels, says that’s fine so long as it’s application specific.

“The fleets know best their operations and vehicle duty cycles,” he says. “We would just recommend they have some established program for checking torque.”

Keeping wheels clean can also help prolong their life. A simple soap and water bath is sufficient for aluminum, while a wire brush is an effective tool in removing corrosion from steel.

“The faster we take care of any rust,” Uzarek says, “the longer the wheel should last.”

“If you maintain the appearance of your wheels, that prolongs the life of that wheel,” adds Walters. “The hidden corrosion is what’s going to get you. If you wash the truck and keep it clean, that’s key to keep corrosion from working down into the hidden places.”

Putz says keeping wheels clean is important to also ensure the longevity of the wheel against harsh salts and corrosives used to de-ice roads that can also eat through the wheel’s finish.

Wheel makers have developed advanced propriety anti-corrosive surface treatment coatings for their wheels that won’t flake, which Walters says offer advantages over many paints.

Wheel re-finishing is an option to make worn wheels look like new, but Uzarek cautions that a coat of paint won’t fix structural issues. When wheels begin to lose material, they need to be removed from service.

And the process of re-finishing can also be tricky. Uzarek says paint applied too thick can cause a loss in clamping force as can paint that has not cured properly.

Putz says each wheel should be thoroughly re-inspected after the refinishing processes is complete and, Walters adds, habitual wheel refinishing can remove enough wheel material to make it unsafe to operate.

“One thing we hear a lot of is burning off the paint in an oven and we have not approved that process,” he says. “Depending upon time and temperature, it could change the mechanical properties or the microstructure of the steel.”

When refinishing, you also must be aware that you could be eroding the roll stamp on the wheel, the visibility of which is mandatory for its use on the highway.

“Once the roll stamp is gone, you’ve basically got junk,” Walters says. “Once you cannot read the DOT stamp, you’re done.”

- See more at: http://www.hardworkingtrucks.com/steel-aluminum-work-truck-wheels/#sthash.Qca0f8LU.dpuf

Wednesday, February 1, 2017

Chevrolet Commercial Link


Chevrolet Commercial Link | Putting Vehicle Information At Your Fingertips